Operating system: mocor5
System data type.: 32 bits
Chip platform: 9820E
Main frequency: 1.2GHz
Architecture: Dual-core ARM CortexTM A7MP processor
Number of cores: dual core
Support standard: GSMWCDMAFDD-LTETDD-LTE
Frequency band (A):
4G-FDD: Band T2)3578
4G- -TDD: Band38394041 (100M);
3G-WCDMA: Band 1258
2G-GSM: Band 2358;
Frequency band (B):
4G-FDD: B1 B2 B3 B4 B5 B7 B8 B17 B20 B28A
2G-GSM: B2 B3 B5 B8
Standby mode: single card NANO
Receive diversity: support
“2G Data (2G Data): EDGE”
“3G data rate (3G Data): DC- HSPA+4. 22.2Mbps”
“4G Data: CAT4”
Chip IC, supplier: PN614G8D2TE-B8BE0, XTX
Memory type (ROMRAM): NAND+LPDDR2
Memory capacity. (RAM+ROM): 2Gb+4Gb
External memory cardtype: not supported
Chip model: integrated inside the main chip
GPS signal: L, 1575. 42MHz C/A code”
GPS channel number: 22 channels
GPS chip receiving sensitivity: tracking:, 165dBe, capture:, +148dBm
GPS positioning accuracy: 5-15 meters
GPS antenna: LDS/ceramic
AGPS fast positioning time: 26 seconds cold start
LBS base station positioning: support
Base station positioning accuracy: 100-1000M
WiFi chip model: built-in
WiFi standard: 802. 11b802. 11g802. 11n
WiFi positioning accuracy: according to AutoNavi or Google data
Battery capacity: 500mAh
Average standby current: 5mA/h
Average working current: 11mA/Hh (positioning every 10 minutes–times)
Working temperature: -20~70″C
Working humidity: 5% to 95% without freezing
Product modeling: Clip-on locator
Appearance size: 52*42* 1 5mm
Screw and screwdriver: Yes
Data cableType: Magnetic UBS charging cable
Packing type: box type
UI style: Jiugongge
Real-time positioning: query position information and adjust positioning interval, and navigate to find pets.
Historical track: view the track of any day in 90 days
1. GPS fence: Compare GPS positioning data and judge whether there is an alarm when entering or leaving the fence.
2. WIFI fence: Compare WIFI hotspots and judge whether there is an alarm when entering or leaving the fence.
Health: Calculate the pet’s exercise volume, calorie consumption and exercise journey.
1. Dial the locator phone: listen to the sounds around the pet.
2. Voice monitoring: require the locator to call back the designated number and listen to the sounds around the pet
Set up the pet locator.
1. The main control number is used to receive alarm information.
2. The sensor light is used to set the automatic dazzling light; after it is turned on, the dazzling light will automatically turn on when the ambient light becomes dim. (This function is turned off by default, please turn it on according to the actual situation)
3. Find pets: After receiving instructions for pet positioning, it will make intermittent or long beeping sounds. It is convenient to find pets more quickly.
Message list: Display all alarm lists of the pet locator, including offline, low battery, and access to electronic fences.
Open all will receive alarm push. Be sure to turn on the relevant push permission in the application permission of the phone.